In this paper the abrasion rate on a coarse-clastic beach was evaluated by calculating the volume loss recorded on indigenous pebbles within a 13-month timespan. The experiment was carried out at Marina di Pisa (Italy) on an artificial beach that was built to counteract the erosion processes affecting this sector of the coast. A total of 240 marble pebbles (120 rounded and 120 angular) were marked using the RFID technology and injected on the beach. The volume loss measured after consecutive recovery campaigns was progressively increasing, reaching the maximum value after 13 months (61% overall). The average volume loss is consistent between rounded and angular pebbles at any time (59.3% and 64.2% after 13 months respectively), meaning that the roundness is not a primary control factor on abrasion rate. The pebbles that did not reach such abrasion rates after 8 and 10 months (volume loss less than 20%) were found at heights equal or greater than 2 m above mean sea level, on the crest of the storm berm that formed during the strongest storms. This implies that the highest wearing is achieved in the lower portion of the backshore, which is also the area that underwent major topographic modifications. Here, sea water action might also exert chemical influence on the pebbles, adding to the mechanical abrasion. The main result of this research, indicating an impressive volume loss on beach pebbles in a short timespan, could be of key importance for coastal managers. The optimization of coarse sediment beach nourishments is also relevant, taking into right consideration that the volume loss due to sediment abrasion might exceed 50% of the original fill volume just after 1 year in the most dynamic portion of the beach.
Scheda prodotto non validato
Scheda prodotto in fase di analisi da parte dello staff di validazione
|Titolo:||Impressive abrasion rates of marked pebbles on a coarse-clastic beach within a 13-month timespan|
|Appare nelle tipologie:||1.1 Articolo in rivista|
File in questo prodotto: